Ball Valve Accessories
®
®
Lift-N-Lock ®
Tamper Proof Design
Description
The Jomar heavy duty locking device prevents
unauthorized use durning maintenance or down-time.
The locking device is simply attached over the stem
and handle and held in place with a allen screw that is
threaded into the center of the stem. With the padlock
in place, the allen screw is not accessible, making it a
tamper proof design.
Specifications
Type 1: Fits 100 Series* sizes: 1/4 ”, 3/8” and 1/2”
Type 2: Fits 100 Series* sizes: 3/4”
Type 3: Fits 100 Series* sizes: 1” and 1-1/4” Filterball
Sizes: 1/2 ”, 3/4” and 1”
Two Styles Available:
  • Lock in open or closed posistion
    • Type 4: Fits 100 Series* sizes:1-1/2” and 2” Filterball
  • Lock in closed posistion only
    • Handle Extension*
    sizes: 1-1/4” & 1-1/2”
    Type 5: Fits 100 Series* sizes: 2-1/2” and 3” Filterball
    sizes: 2”
    Stem-Extension
    Description
    The Jomar heavy duty handle extensions are available
    for applications where it is necessary to extend the
    valve handle approximately 2” higher from it’s original
    position.
    Architect/Engineer approval
    Specifications
    Job Name
    Date
    Model Specified
    Quantity
    Type 1: Fits sizes 1/4 ”, 3/8” and 1/2”
    Variations Specified
    Type 2: Fits size 3/4”
    Customer/Wholesaler
    Type 3: Fits sizes 1” and 1-1/4”
    Contractor
    Type 4: Fits sizes 1-1/2” and 2”
    Architect
    Type 5: Fits 100 Series* sizes: 2-1/2” and 3”
    *Fits Models T/S-100N, T/S-100N-SS, T/S-100C, T/S-100C-E, T-100UE, T-100ST, T-100N-FM AND S-100DUE
    Note: Information subject to change without notice.
    Jomar International Ltd.
    ®
    ®
    7243 Miller Drive
    Warren, MI 48092
    Phone: 800-325-5690
    Fax: 800-628-4194
    www.jomar.com
    Ball Valve Accessories
    Slow-Ball Handle*
    ®
    ®
    Mechanical Round Handle
    Slow Open & Close Valve
    Description
    The Jomar Slow-Ball is a 360° gear-closing handle
    that allows metering of the fluids under high pressure
    thus preventing a potential water hammer situation in
    the pipe.
    Specifications
    Type 1: Fits sizes 1/4 ”, 3/8” and 1/2”
    Type 2: Fits size 3/4”
    Type 3: Fits sizes 1” and 1-1/4”
    Type 4: Fits sizes 1-1/2” and 2”
    *Fits Models T/S-100N, T/S-100N-SS, T/S-100C, T/S-100C-E, T-100UE, T-100ST, T-100N-FM AND S-100DUE
    LongNeck T-Handle
    Description
    The Jomar LongNeck T-Handle is ideal for applications
    where piping will be insulated.
    Specifications
    Type 1: Fits sizes 1/2” T-1000 series
    Type 2: Fits size 3/4” T-1000 series
    Type 3: Fits sizes 1” and 1-1/4” T-1000 series
    Note: Information subject to change without notice.
    Jomar International Ltd.
    ®
    ®
    7243 Miller Drive
    Warren, MI 48092
    Phone: 800-325-5690
    Fax: 800-628-4194
    www.jomar.com